SONY-EVC-HD11P Sony high-definition video conferencing camera Wang 
 A. Smart menu programming capabilities to facilitate the machine system, PTZ, camera parameters can be flexible to play, to meet the multi-level user. 
 Two. Preset: 128, Accuracy: error of less than 0.1 degrees (the first timing calibration reset function). 
 3 power-on self test message, the remote menu to modify the protocol, address, baud rate and other communications and information, and have remote reset function. 
 4 built-in systems, cameras, PTZ function to set the man-machine dialogue programming menu. (Operating help, information, tips). 
 Control speed manual, automatic adjustment: PTZ speed increase in the speed ratio decreased gradually with the zoom depth far. 
 6 lenses of variable zoom speed control: built-in menu setting the zoom speed set at level 1-7. 
 The clock display, menu programming clock timing operation: preset position, the vertical / horizontal scan, preset patrol, four-point scanning, multi-point scanning. 
 Guard bit run of the menu programming: preset position, vertical / horizontal scan, preset patrol two or four scans, multi-point scanning. 
 Menu programming 2-way alarm input, 1 output operation: preset positions, preset patrol, vertical / horizontal, two or four-point, multi-point scanning. 
 10 128 preset positions to inspect any programming function: -255 seconds, one second of residence time can be set through the setup menu. 
 11 programmable horizontal, vertical scanning speed: built-in menu settings can be scan speed per second between 1-255 degrees. 
 12.6 can be freely programmed multi-point string and a pre-trajectory model. 
 13 6 group of two or four-point scanning: programmable vertical and horizontal sync trackball surface run. 
 14 pattern trajectory line storage performance test can remember, including the standard P / T / Z control trajectory. 
 15 Auto flip: allows the ball in the vertical stroke in the end the Ministry of the level of rotation 180. 
 16 levels of manual control speed: 0.1 / sec 180 / sec; vertical manual control speed: 0.1 / s -120 / sec. 
 17-one package can be installed SONY the VISCA, PELCO P / D and the RTC computer intelligence to control the three kinds of software and unique information to modify the software. 
 18 Control Protocol the: PELCOP / D, SONY the VISCA, baud rate: 1200,2400,4800,9600,19200. 
 Specifications of the EVC-HD10P (SONY original movement) 
 Imaging equipment 1/3CMOS 
 CCD Effective Pixels 2.0 million 
 Signal System NTSC / PAL 
 Horizontal resolution of 1080i/720p 
 Synchronization System Internal / External 
 Lens 10x optical, 12x electronic zoom 
 Focal length f = 5.1mm-50.1mm, F1.8-F2.1 
 Horizontal Viewing Angle 5.4 - 50 
 Minimum object distance of 10mm 
 Pan / tilt angle of 360 degrees (pan), 120 degrees (pitch) 
 Pan / tilt speed 0.1-180 (translation) / s / 0.1-120 (pitch) 
 Minimum Illumination 12LUX/F1.1.8 
 SNR> 50 dB, 
 Shutter speed 1/2 to 1/10, 000 s 
 Gain automatic / manual 
 White Balance Auto, manual, indoor, outdoor, ATW, one-touch white balance 
 128 preset positioning location programming 
 Camera control interface RS-232C (the VISCA protocol) / RS-422 (the VISCA protocol) / PELCO: P / D 
 AE control automatic, manual, priority mode, brightness, EV compensation, backlight compensation, Slow the AE 
 EV Compensation -10.5 ~ 10.5dB (1.5dB per file) 
 Signaling system HD 1080i / 59.94,1080 i/50 
 720p/59.94 on, 720p/50 
 The SD NTSC (Crop / Squeeze), PAL (Crop / Squeeze) 
 Video Output HD component: Y / Pb / Pr 
 SD vbs,: 1.0 Vp-p (sync negative) Y / C 
 Menu without the OSD menu 
 Backlight compensation on / off 
 Operating temperature 0-40 degrees